3.BASIC COPY MODES
4
Press the buttons below to select the desired reproduction ratio.
[
UP] and [
The reproduction ratio changes by 1% every time either of them is pressed. When you hold either down, the
ratio goes up or down automatically.
One-touch zoom buttons
Select the desired ratio from [400%], [200%], [100%], [50%] and [25%].
When the RADF (optional) is used, the maximum ratio available is 200%.
5
Select the desired size, and then press [OK].
If you want to select a paper size other than the following, you need to register the size as "OTHER". Once
you register this size, it will be specified every time you press [OTHER] on the touch panel.
North America: LD, LG, LT, ST
Other than North America: A3, A4, B4, B5
For how to register, see the following page:
P.59 "Registering paper sizes to "OTHER" size"
Paper sizes can also be registered by pressing the desired drawer button of the equipment status indication
area on the BASIC menu.
6
Select other copy modes as required, and then press the [START] button on the control
panel.
DOWN] buttons
3 BASIC COPY MODES
Enlargement and Reduction Copying
61