Oki CX4545 MFP Copying Manual page 61

3.BASIC COPY MODES
3
Press [ZOOM] on the touch panel.
4
Select the desired sizes for the original and copy paper, and then press [OK].
 If you want to select a size other than the following for the original size and copy paper size, you need to
register the size as "OTHER". Once you register this size, it will be specified every time you press [OTHER]
on the touch panel.
North America: LD, LG, LT, ST
Other than North America: A3, A4, B4, B5
For how to register, see the following page:
 P.59 "Registering paper sizes to "OTHER" size"
 Paper sizes can also be registered by pressing the desired drawer button of the equipment status indication
area on the BASIC menu.
5
Select other copy modes as required, and then press the [START] button on the control
panel.
 Registering paper sizes to "OTHER" size
If you want to select a size other than the following for the original size and copy paper size, you need to register the size
as "OTHER" following the procedures below. Once you register this size, it will be specified every time you press [OTHER]
on the touch panel.
North America: LD, LG, LT, ST
Other than North America: A3, A4, B4, B5
You can register only standard sizes as [OTHER] and cannot register any non-standard sizes.
3 BASIC COPY MODES
Enlargement and Reduction Copying 59