1 BEFORE USING EQUIPMENT
8
Push the part shown with an arrow (left side) to lock
the side guide.
9
Change the paper size indicator if required.
10
Push the drawer straight into this equipment carefully until it comes to a stop.
Be careful not to let your fingers be caught when pushing the drawer into this equipment.
This could injure you.
11
The menu below appears. When the size or type of paper is different from the one that
was in the drawer, press [NO] on the touch panel. When they are the same, press [YES].
The menu above may not appear depending on the setting of this equipment. In this case, see the following
pages to change the settings of the paper size and paper type:
P.16 "Registering paper size"
P.17 "Setting paper type"
If you want to change the setting for displaying this menu, ask your administrator.
If you press [YES], the procedure is completed.
14
Placing Paper