Edge Erase - Xerox WorkCentre 5050 Quick Reference Manual

Edge Erase

Use this feature to "refresh" the quality of an original that has become torn or frayed
at the edges, or that has hole punch, staple or other marks.
Options:
Erases equal amounts on all edges of the copies. Up to 2.0 inches in 0.05 inch
Border Erase
increments can be erased.
Use to erase a specific amount from a specific edge of the copy. Up to 2.0 inches
Edge Erase
in 0.05 inch increments can be erased from each edge.
Use this option to print to the edge of the output stock.
Print to Edge
NOTE: This option may reduce the ability of the system to clean itself and can
cause defects on the output if used excessively.
Page 4-14 Quick Reference Guide