Booklet Creation - Xerox WorkCentre 5050 Quick Reference Manual

Booklet Creation

Use this feature to create multipage booklets from a sequential set of either single-
sided or double-sided originals. The machine will reduce and correctly position each
image to fit on the required page. When the page is folded a booklet will be created.
NOTE: Your originals should be loaded Long Edge Feed (LEF) in the Document
Handler with the output paper loaded Short Edge Feed (SEF) in the paper tray.
Options:
The feature is switched off.
Off
Use this option to enable the Booklet Creation feature. Booklet Creation On options
On
are as follows:
1 Sided Originals
2 Sided Originals
Quick Reference Guide
Select this option if the originals are single-sided.
Select this option if the originals are double-sided.
Page 4-19