Bound Originals - Xerox WorkCentre 5050 Quick Reference Manual

Bound Originals

Use this option to program which page or pages of a bound document are to be
scanned and faxed.
The bound original is placed face down on the Document Glass with the spine of
the book lined up with the marker on the rear edge of the glass. Align the top of the
bound original against the rear edge of the document glass. Do not close the
document handler during the faxing process.
HINT: If necessary, apply a little pressure to the center of the book to flatten it
during scanning.
Options:
The feature is switched off.
Off
Faxes only the page on the right when looking at the open book, face up.
Right Page
Faxes only the page on the left when looking at the open book, face up.
Left Page
Faxes both pages of an open book, in left to right order when looking at the open
Both Pages
book face up. Each page is placed on a separate sheet of paper.
Erases a specified area from the center of the book to eliminate unwanted marks
Binding Erase
caused by scanning the binding area. Up to 1.0 inch can be erased.
Quick Reference Guide Page 5-11