Setting The Aux Mode (V-Link); Demonstration - Alpine CDA-7873R Owner's Manual

Basic
SOURCE
g DN
f UP
Basic Operation

Setting the AUX Mode (V-Link)

You can input TV/video sound by connecting an
optional Ai-NET/RCA Interface cable (KCA-121B)
or Versatile Link Terminal (KCA-410C) to this
component.
1
Press and hold the SETUP button for at least 3
seconds.
2
Press the f UP button repeatedly to select
"AUX."
Each press of the f UP button changes the
modes as shown:
NOTE
If you press the g DN button the display scrolls in
reverse sequence.
FM-LV REG PTY31 HI-FI/NORMAL/STABLE AMBER
DEMO AUX (AUX Mode Display Setting ) SCR MUTE BEEP
CDA-7873R/TDA-7587R Only
Displayed after AUX ON is set.
3
Press the TUNE button to toggle the mode
between "AUX ON" and "AUX OFF."
NOTES
The initial setting at the factory is AUX OFF.
You can set the AUX mode display by pressing the
g DN or f UP button after AUX ON is set,
select the AUX mode display setting, and then press
the TUNE button.
When connecting the Versatile Link Terminal (KCA-
410C), you can set two AUX mode displays.
4
Press the SETUP button to return to the normal
mode.
10
-EN
TUNE MODE/BAND
CENTER f SETUP
DIM SUB
5
To adjust the volume, etc., first press the
SOURCE button and select the AUX mode, then
make the necessary adjustment.
NOTE
When using the Versatile Link Terminal (KCA-410C), you
can connect two external inputs. To select the mode,
press the BAND button on the unit.

Demonstration

This unit has the Demonstration feature which
simulates the display functions on the display panel.
1
Press and hold the SETUP button for at least 3
seconds.
2
Press the f UP button to select the "DEMO"
mode. Each press changes the modes as
shown:
FM-LV REG PTY31
DEMO AUX SCR
CDA-7873R/TDA-7587R Only
NOTE
If you press the g DN button the display scrolls in
reverse sequence.
HI-FI/NORMAL/STABLE AMBER
MUTE BEEP SUB DIM