Sound (Beep) Guide Function; Turning Mute Mode On/Off (Int Mute); Setting The Aux+ Setup Mode; Setting The Aux+ Level (Aux In Gain) - Alpine CDA-9886 Owner's Manual

01GB00CDA9886.book Page 18 Friday, September 28, 2007 10:20 AM

Sound (Beep) Guide Function

Beep ON (Initial setting) / Beep OFF
This function will give audible feedback with varying tones depending
upon the button pressed.

Turning Mute Mode On/Off (INT Mute)

INT Mute ON / INT Mute OFF (Initial setting)
If a device having the interrupt feature is connected, audio will be
automatically muted whenever the interrupt signal is received from the
device.

Setting the AUX+ Setup Mode

AUX+ Setup ON / AUX+ Setup OFF (Initial Setting)
An external device (such as a portable music player) can be connected
to the iPod Direct connector of this unit. An iPod Direct/RCA Interface
cable (optional) is required.
A portable music device and an iPod cannot be connected to the iPod
Direct connector at the same time.
AUX+ ON : Set to ON when a portable device is connected. If
SOURCE/
sound of the portable device is input to the unit.
AUX+ OFF : Set to OFF when an iPod is connected.
You can change the AUX+ Name display when AUX+ is set to ON.
Press /ENT when AUX+ is set to ON, and select AUX+ Name by
turning the Rotary encoder, then press
Rotary encoder to select the desired AUX+ Name.

Setting the AUX+ Level (AUX IN GAIN)

Low (Initial setting ) / High
After setting to ON in "Setting the AUX+ Setup Mode", this setting can
be carried out.
Low: Decreases the external input audio level.
High: Increases the external input audio level.

Setting the External Digital Input

Digital AUX ON / Digital AUX OFF (Initial setting)
When an ALPINE Ai-NET compatible digital audio processor
(PXA-H701) and a DVD player (DVE-5207) not compatible with
Ai-NET are connected, set Digital AUX to ON to enjoy 5.1-channel
surround sound.
You can change the Digital AUX name display when Digital AUX is set
to ON. Press /ENT when Digital AUX is set to ON, and select
Digital AUX name by turning the Rotary encoder, then press
/ENT. After that, turn the Rotary encoder to select the desired
Digital AUX name.
• Press SOURCE/ , and select the D.Aux mode, and adjust the
volume, etc.
• After input selection is completed, turn the ignition off and back on
again. Setting of the optical digital input switch is completed.
• Depending on the connected audio processor, DVD player sound
may continue to be output, even though the source is changed to
another one. If this occurs, set the DVD player's power to OFF.
18
-EN
01GB05CDA9886.fm
is pressed and AUX+ is selected, the
/ENT. After that, turn the

Setting the AUX Mode (V-Link)

AUX IN ON / AUX IN OFF (Initial setting)
You can input TV/video sound by connecting an optional Ai-NET/RCA
Interface cable (KCA-121B) or Versatile Link Terminal (KCA-410C) to
this component.
You can change the AUX Name display when AUX IN is set to ON.
Press /ENT when AUX IN is set to ON, and select AUX Name by
turning the Rotary encoder, and then press
After that, turn the Rotary encoder to select the desired AUX Name.
If the KCA-410C is connected, it is possible to select two AUX Names.
• Via KCA-410C, up to 2 external devices with RCA output can be
connected. In this case, press SOURCE/
then press BAND to select your desired device.

Connecting to an External Amplifier

Power IC ON (Initial setting) / Power IC OFF
When an external amplifier is connected, sound quality can be improved
by stopping the power supply of the built-in amplifier.
Power IC OFF : Use this mode when the line output of this unit
is used to drive an external amplifier. In this
setting, the head unit's internal amplifier is
turned OFF and can not drive speakers.
Amplifier
Amplifier
Power IC ON : The speakers are driven by the built-in
amplifier.
SPEAKER
RIGHT FRONT
SPEAKER
RIGHT REAR
SPEAKER
LEFT REAR
SPEAKER
LEFT FRONT
• No sound is produced by the system when the power output is set to
OFF.

Demonstration

Demo ON / Demo OFF (Initial setting)
This unit has a demonstration feature for the display.
• To quit Demo mode, set to Demo OFF.
ALPINE CDA-9886 68-09359Z43-A (EN)
/ENT.
to select AUX mode and
Front
left
Front
right
Rear
left
Rear
right
Speakers
Front
right
Rear
right
Rear
left
Front
left