Radio Operation; Switching The Tuner Mode; Manual Tuning - Alpine CDA-7873R Owner's Manual

Radio
SOURCE
g DN

Radio Operation

Switching the Tuner Mode

The CDA-7876RB/CDA-7873R/TDA-7588RB/
TDA-7587R incorporates the MAX TUNE Pro for
the highest quality tuner audio. Moreover, you can
choose between two settings to suit your own
personal sound preferences usage.
1
Press and hold the SETUP button for at least 3
seconds.
2
Press the g DN or f UP button to select
the "HI-FI or NORMAL or STABLE." Each press
of the f UP button changes the modes as
shown:
FM-LV REG
DEMO AUX
CDA-7873R/TDA-7587R Only
3
Press the TUNE button to switch the TUNER
mode.
HI-FI
NORMAL: Standard setting
HI-FI: Sound quality priority setting
STABLE: Noiseless priority setting
NOTES
The initial setting at the factory is "NORMAL."
If you find the sound is very noisy while listening to
the tuner in the HI-FI mode, we recommend you
change to the NORMAL mode.
4
When the setting is completed, press the SETUP
button to return to the normal mode.
14
-EN
TUNE
f UP
PTY31 HI-FI/NORMAL/STABLE
SCR MUTE BEEP SUB
NORMAL STABLE
BAND
SETUP Preset buttons
(1 through 6)

Manual Tuning

1
Press the SOURCE button until a radio
frequency appears in the display.
2
Press the BAND button repeatedly until the
desired radio band is displayed.
Each press changes the band:
FM1
3
Press the TUNE button repeatedly until "DX
SEEK" and "SEEK" disappear from the display.
NOTE
The initial mode is DX SEEK.
4
Press the g DN or f UP button to move
AMBER
downward or upward one step respectively until
DIM
the desired station frequency is displayed.
NOTE
The ST indicator appears on the display when a Stereo
FM station is tuned in.
FM2 FM3 MW LW