Turning Mute Mode On/Off (Int Mute); Setting The Aux+ Setup Mode; Setting The Aux+ Level (Aux In Gain); Setting The External Digital Input - Alpine CDA-9886 Quick Reference Manual

POWER
Ie
ON: The speakers are driven by the built-in
amplifier
Setting the External Digital Input
D-AUX ON I D-AUX OFF (lnltisl setting)
When an ALPINE Ai-NET compatible digital audio processor
(PXA-H701) and a DVD player (DVE-5207) not compatible with
Ai-NET are connected. set D-AUX to ON to enjoy 5. I-channel
surround sound.
You can change the D-AUX NAME display when D-AUX is set to ON.
Press
C\
/ENT when D-AUX is set to ON, and select D-AUX NAME
by turning the Rotary encoder. then press
C\
lENT. After that, turn
the Rotary encoder to select the desired D-AUX NAME.
• Press SOVRCElC> , and select tire D1GITAL-AUX mode, and adjllst
tire voillme, etc.
• After inpllt selection is completed, tllrn tire ignition off and back on
again. Settillg of the optical digital inpllt switch is completed.
• Depending all tire connected alldio processor. DVD player sOllnd
may colllinlle to be Olltpllt, even thollgh the SOllrce is changed to
wlOtherone.
If
this OCCllrs, set the DVD player's power to OFF.
Rear
left
Rear
right
8
8
SPEAKER
LEFT REAR
SPEAKER
RIGHT REAR
SPEAKER
RIGHT FRONT
Speakers
(B
/1
Front
------8~---...:84\j
right
• No soulld is produced by the system wlrell tire power oUtpllt is set to
OFF.
Turning Mute Mode On/Off (INT MUTE)
MUTE ON I MUTE OFF (lnitisl setting)
I f a device having the interrupt feature is connected, audio will be
automatically muted whenever the interrupt signal is received from the
device.
Setting the AUX+ SETUP Mode
AUX+ ON I AUX+ OFF (Initisl Setting)
An external device (such as a portable music player) can be connected
to the iPod Direct connector of this unit. An iPod Direct/RCA Interface
cable (optional) is required.
A portable music device and an iPod cannot be connected to the iPod
Direct connector at the same time.
Changer Name Setting
CHANGER (lnitlsl Setting) I USB I PORTABLE
This setting is used when the head unit is connected to the USB Adapter
for MP3 (KCA-620M). You can set the name to be displayed on the unit
depending on the device
to
which the USB Adapter for MP3
(KCA-620M) is connected.
Setting the AUX Mode (V-Link)
AUX IN ON I AUX IN OFF (Initisl setting)
You can input TV/video sound by connecting an optional Ai-NET/RCA
Interface cable (KCA-12l B) or Versatile Link Terminal (KCA-41 OC) to
this component.
You can change the AUX name display when AUX IN is set to ON.
Press
C\
lENT when AUX IN is set to ON. and select AUX NAME by
turning the Rotary encoder, and then press
C\
lENT.
After that, turn the Rotary encoder to select the desired AUX name.
If the KCA-410C is connected. it is possible to select two AUX names.
• Via KCA -41OC. lip 10
2
external devices with RCA OlltPllt can be
cOllnected. III this case, press SOVRCEIC> to select AUX mode and
then press BAND to select your desired device.
Front
left
8
SPEAKER
LEFT FRONT
AUX+ ON: Set to ON when a portable device is connected. If
SOURCE/<!> is pressed and AUX+ is selected, the
sound of the portable device is input to the unit.
AUX+ OFF: Set to OFF when an iPod is connected.
You can change the AUX+ NAME display when AUX+ SETUP is set to
ON. Press
C\
/ENT when AUX+ SETUP is set to ON. and select
AUX+ NAME by turning the Rotary encoder. then press
C\
/ENT.
After that. tum the Rotary encoder to select the desired AUX+ NAME.
HD
Radio
(Only
whe~
t'I[)
Ra •
connfilcted) .. ' • • ,.._ , .
HD Radio Station Call Setting (STATION CALL)
SHORT (Initisl setting) I LONG
In the HD Radio mode, the number of display characters for the HD
Radio station name can be selected.
Setting the AUX+ Level (AUX IN GAIN)
LOW (Initisl setting) I HIGH
After setting to ON in "Setting the AUX+ SETUP Mode". this setting
can be carried out.
Digital Seek ON/OFF Setting
DIG SEEK ON I DIG SEEK OFF (Initisl Setting)
LOW:
HIGH:
Decreases the external input audio level.
Increases the external input audio level.
SHORT:
LONG:
7 characters (FM)
4 characters (AM)
56 characters
ON:
OFF:
SEEK UP/DOWN is used only for Digital Radio
Station.
SEEK UP/DOWN is used for all Radio Stations.
i8-EN
POWER
Ie
ON: The speakers are driven by the built-in
amplifier
Setting the External Digital Input
D-AUX ON I D-AUX OFF (lnltisl setting)
When an ALPINE Ai-NET compatible digital audio processor
(PXA-H701) and a DVD player (DVE-5207) not compatible with
Ai-NET are connected. set D-AUX to ON to enjoy 5. I-channel
surround sound.
You can change the D-AUX NAME display when D-AUX is set to ON.
Press
C\
/ENT when D-AUX is set to ON, and select D-AUX NAME
by turning the Rotary encoder. then press
C\
lENT. After that, turn
the Rotary encoder to select the desired D-AUX NAME.
• Press SOVRCElC> , and select tire D1GITAL-AUX mode, and adjllst
tire voillme, etc.
• After inpllt selection is completed, tllrn tire ignition off and back on
again. Settillg of the optical digital inpllt switch is completed.
• Depending all tire connected alldio processor. DVD player sOllnd
may colllinlle to be Olltpllt, even thollgh the SOllrce is changed to
wlOtherone.
If
this OCCllrs, set the DVD player's power to OFF.
Rear
left
Rear
right
8
8
SPEAKER
LEFT REAR
SPEAKER
RIGHT REAR
SPEAKER
RIGHT FRONT
Speakers
(B
/1
Front
------8~---...:84\j
right
• No soulld is produced by the system wlrell tire power oUtpllt is set to
OFF.
Turning Mute Mode On/Off (INT MUTE)
MUTE ON I MUTE OFF (lnitisl setting)
I f a device having the interrupt feature is connected, audio will be
automatically muted whenever the interrupt signal is received from the
device.
Setting the AUX+ SETUP Mode
AUX+ ON I AUX+ OFF (Initisl Setting)
An external device (such as a portable music player) can be connected
to the iPod Direct connector of this unit. An iPod Direct/RCA Interface
cable (optional) is required.
A portable music device and an iPod cannot be connected to the iPod
Direct connector at the same time.
Changer Name Setting
CHANGER (lnitlsl Setting) I USB I PORTABLE
This setting is used when the head unit is connected to the USB Adapter
for MP3 (KCA-620M). You can set the name to be displayed on the unit
depending on the device
to
which the USB Adapter for MP3
(KCA-620M) is connected.
Setting the AUX Mode (V-Link)
AUX IN ON I AUX IN OFF (Initisl setting)
You can input TV/video sound by connecting an optional Ai-NET/RCA
Interface cable (KCA-12l B) or Versatile Link Terminal (KCA-41 OC) to
this component.
You can change the AUX name display when AUX IN is set to ON.
Press
C\
lENT when AUX IN is set to ON. and select AUX NAME by
turning the Rotary encoder, and then press
C\
lENT.
After that, turn the Rotary encoder to select the desired AUX name.
If the KCA-410C is connected. it is possible to select two AUX names.
• Via KCA -41OC. lip 10
2
external devices with RCA OlltPllt can be
cOllnected. III this case, press SOVRCEIC> to select AUX mode and
then press BAND to select your desired device.
Front
left
8
SPEAKER
LEFT FRONT
AUX+ ON: Set to ON when a portable device is connected. If
SOURCE/<!> is pressed and AUX+ is selected, the
sound of the portable device is input to the unit.
AUX+ OFF: Set to OFF when an iPod is connected.
You can change the AUX+ NAME display when AUX+ SETUP is set to
ON. Press
C\
/ENT when AUX+ SETUP is set to ON. and select
AUX+ NAME by turning the Rotary encoder. then press
C\
/ENT.
Alier that. tum the Rotary encoder to select the desired AUX+ NAME.
HD
Radio
(Only
whe~
t'I[)
Ra •
connfilcted) .. ' • • ,.._ , .
HD Radio Station Call Setting (STATION CALL)
SHORT (Initisl setting) I LONG
In the HD Radio mode, the number of display characters for the HD
Radio station name can be selected.
Setting the AUX+ Level (AUX IN GAIN)
LOW (Initisl setting) I HIGH
Alier setting to ON in "Setting the AUX+ SETUP Mode". this setting
can be carried out.
Digital Seek ON/OFF Setting
DIG SEEK ON I DIG SEEK OFF (Initisl Setting)
LOW:
HIGH:
Decreases the external input audio level.
Increases the external input audio level.
SHORT:
LONG:
7 characters (FM)
4 characters (AM)
56 characters
ON:
OFF:
SEEK UP/DOWN is used only for Digital Radio
Station.
SEEK UP/DOWN is used for all Radio Stations.
i8-EN