Brother PR-650 Operation Manual page 66

EMBROIDERING TUTORIAL
2 Press the start/stop button.
Press the start/stop button while it is flashing
in green. If the start/stop button returns to
being lit in red, perform this procedure again
1
from step .
The start/stop button lights up in green and
begins sewing the first color.
1
1 The thread color for the needle bar that is
currently being used for sewing or will soon be
used for sewing appears at the top of the thread
color sequence display. The remaining thread
colors are listed in the sewing order, starting
from the top.
2 A blue frame appears around the thread
information box of the needle bar currently
being selected.
• While the embroidery machine is sewing,
the point being sewn is indicated by the
green crosshairs in the pattern display area.
In addition, the number of stitches and the
time count up.
64
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
2
3 After sewing of the first color is finished, the
machine automatically stops and trims the
thread. The needle bar case moves to the
2nd color position and sewing of the second
color begins.
The thread color display in the screen
continues to the second color, and the
thread information for the second needle
bar is surrounded by the blue frame.
4 This continues until the last color is sewn,
and the embroidery machine automatically
stops.
The embroidering settings screen
reappears.
The start/stop button lights up in red.
• No thread trimming operations at the
beginning of stitching and at the end of
stitching are necessary.