Brother PR-650 Operation Manual page 221

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
3 With a fabric marker, mark this point on the
fabric.
4 Set the beginning of stitching in the lower-
right corner.
The frame moves so that the needle drop
point aligns with the beginning of
stitching.
5 With a fabric marker, mark this point on the
fabric.
6 Remove the embroidery frame from the
machine, and then connect these two points
to check the embroidering position.
• If the baseline is misaligned or intersects
another line, reframe the fabric in the
embroidery frame or adjust the position of
the pattern.
Helpful Tips for the Operation of the Machine 219
7