About The Maintenance Message - Brother PR-650 Operation Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
■ Oiling the needle bars
From embroidering screen, select one needle
bar at a time. Pull down the selected needle bar
and lock into position (refer to page 97). Put one
drop of oil on the lower needle bar felt washer.
1 Apply oil here.
• Too much oil may drip onto sewing
project.
● Put a drop of oil onto the hook once a day
before use.
● Apply one drop of oil on the lower needle
bar felt washer every 40 – 50 hours of
sewing time.
● Apply only sewing machine oil. Use of
any other type of oil may result in damage
to the embroidery machine.
● Do not apply too much oil. Fabric or
thread may get contaminated. If too much
oil is applied, wipe off any excess with a
rag.
● If the thread breaks while sewing or the
operating noise of the hook becomes loud,
apply oil onto the race hook.
Note
About the maintenance
message
Once this message appears, it is recommended to
take your machine to an authorized dealer or
nearest authorized service center for a regular
maintenance check. Although this message will
disappear and the machine will continue to
function once you touch
display several more times until the appropriate
maintenance is performed.
Please take the time to arrange the maintenance
your machine requires once this message appears.
Such steps will help to ensure you receive
continued, uninterrupted hours of machine
operation for the future.
, the message will
Maintenance 251
7