Reserved Needle Bar Settings - Brother PR-650 Operation Manual

EMBROIDERING SETTINGS — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Reserved Needle Bar Settings

Normally, the machine automatically assigns thread colors to the needle bars; however, a specific thread
color can be manually assigned to a certain needle bar. If a needle bar is specified, that needle bar is
removed from the machine's automatic assignments and the specified color remains assigned to it.
By specifically assigning often used thread colors to certain needle bars, the trouble of changing the thread
spools can be reduced.
Note
● This feature is not accessible through the embroidering screen.
Once a manual needle bar setting is specified, it
remains applied until the setting is cancelled.
The manual needle bar settings can be specified in
page 3/5 of the settings screen.
1 Touch , and then touch
to display page 3/5 of the settings
screen.
Touch , ,
2
number of the needle bar that you wish to
specify.
1 Indicates the number of the selected needle bar
132
and
, , or for the
1
3 Select the color to be assigned to the needle
bar.
Touch , ,
that you wish to select from the thread table
appears enlarged.
1
1 The color that appears enlarged is the color that
is selected.
2 Displays the color that is selected and its name
Highlighting a color square moves in the
direction of the arrow on the key that is
touched.
and until the color
2