Citizen PMU2300III User Manual page 53

5. Press the FEED switch for at least two seconds.
A setting for the memory switch is printed, through the cycle, each time the FEED
switch is pressed for at least two seconds.
Press the FEED switch for at least two seconds to cycle through the list until the
function of the memory switch you want to change is printed.
6. Press the FEED switch.
A setting is printed each time the FEED switch is pressed in order through the cycle.
When the current settings are printed, the ERROR LED lights.
Press the FEED switch until the setting you want is printed.
7. Press the FEED switch for at least two seconds.
The selected settings are set.
The next memory switch function and settings are printed.
8. Repeat steps 5 to 7 to change different functions for the current memory switch
number.
9. Open the platen holder and close it.
The changed memory switch settings are printed.
10. Repeat steps 4 to 9 to change functions for a different memory switch number.
11. Press the FEED switch until "Save To Memory" is printed.
12. Press the FEED switch for at least two seconds.
The changed memory switch settings are saved and a list of them is printed.
The printer exits memory switch setting mode when printing is finished.
Memory switch initialization
Set all the memory switches to the factory settings.
1. Do steps 1 through 3 of the procedure to enter individual setting mode.
2. Press the FEED switch until "Save To Memory" is printed.
3. Open the platen holder.
4. Press the FEED switch for at least two seconds.
All memory switches change to the factory settings.
5. Close the platen holder.
Memory switch function
Current setting
— 52 —