2.2 PMU2300III Series
This printer is equipped with a function for controlling the bezel LED during
standby / printing / discharge. This function can be switched to valid / invalid
using the memory switch.
- For the bezel, two types; for main unit and for presenter are available. For the
bezel for the main unit, the bezel paper detection sensor is attached in the
bezel and the paper can be detected.
* For details on each command, refer to the command reference.
When the bezel is attached
Bezel
Presenter section
Presenter unit
Presenter paper detection sensor
(when the cover is removed)
Bezel (for Presenter)
Cover unit
Cover unit fixing screw
Presenter roller
Presenter paper retract sensor
— 18 —