Model Classification - Citizen PMU2300III User Manual

1.3 Model Classification

Model numbers indicate printer features according to the following system.
1.3.1 Model Name
PMU2300 III P B - RS U M1
Specification of mechanism
S: Standard
P: Standard+presenter
Bezel
N: Not equipped with Bezel
B: Equipped with Bezel
Interface (Serial, Parallel, USB; See P26, P27)
RS: Serial (RS-232C compliant)
PA: Parallel (IEEE1284 compliant)
UB: USB
1.3.2 Optional (Paper holder)
Maximum paper diameter
102: ø102mm
203: ø203mm
1.3.3 Precautions
–Registration in the printer main unit–
Following items has been registered in the printer main unit as a factory option
depending on the model and they cannot be changed by a user.
• Model name of self printing (See page 40)
• ROM version of self printing (See page 40)
• Initial value when it is shipped from factory (initial value of command "reset
all contents set by GS (E function: 255 printer function setting mode) to the
factory-setting status", varies depending on the model)
* It is possible to change the setting to the same setting as that of other model
by memory switch setting.
Sensor (Black Mark)
No mark : No sensor
M1: Black Mark (left)
M2: Black Mark (right:Platen open lever
PHU - 102 S
— 13 —
side)
Destination
J : Japan
U : North America / Europe
Paper insertion direction
S : Side insertion
T : Top insertion