Citizen PMU2300III User Manual page 20

2.2.1 Memory switch setting (Presenter function)
The presenter function can be set with MSW11.
1. MSW11-1: Presenter
Function : Validity/invalidity of presenter function is selected.
Operation at OFF (Invalid): The presenter function is disabled.
Operation at ON (Valid):
2. MSW11-2: Retract Function
Function : Validity/invalidity of recovery operation is selected.
Operation at OFF (Invalid): The recovery operation is disabled.
Operation at ON (Valid):
- The recovery time can be set with the Setting Command, GS ( E, of
customized value. Also, the recovery time until power being OFF is
changeable with the setting command, GS R 1, of the Receipt Recovery
Timer value.
Initial Value of Recovery Time: 5s
3. MSW11-3: Retract Direction
Function : Selects recovery direction at Retract Function Valid (MSW11-2 = ON)
Operation at OFF (Rear):
Operation at ON (Forward): Ejects paper forward.
4. MSW11-4: Store and eject
Function : Selects valid/invalid of ejection after accumulation.
Operation at OFF (Invalid): When paper is reached to Presenter Roller,
Operation at ON (Valid):
5. MSW11-5: No print with paper
Function : When recovery sensor is detecting paper, selects valid/invalid of the next
printing/ejecting operation.
Operation at OFF (Invalid): Even when the recovery sensor detects paper,
Operation at ON (Valid):
6. MSW11-6: Min Receipt Length
Function : Selects minimum receipt length.
Operation at OFF (75mm): Sets the minimum length at 75mm.
Operation at ON (120mm): Sets the minimum length at 120mm.
The setting of MSW11-2~MSW11-6 is disabled.
The Presenter function is enabled.
The setting of MSW11-2~MSW11-6 is enabled.
The recovery operation is enabled.
After ejecting paper, the function performs
paper recovery either in forward ejection or rear
side recovery after a certain time passed with
the setting of MSW11-3 (Retract Direction).
By the execution of Retracting receipt
immediately Command GS R 0, conducts
instant recovery operation.
Recovers paper from rear side.
synchronizes with printing line-feed without
paper sagging and conducts paper ejection.
Paper ejection does not occur even when the
paper reaches to the Presenter Roller and
conducts paper ejection after paper sagging
of maximum 220 mm.
conducts the next printing/ejection operation.
When the recovery sensor is detecting paper,
waits the next printing/ejection operation
until the sensor fails to detect paper.
— 19 —