4.1.2 Paper Holder: PHU-203T
1. After confirming the winding direction of
paper, insert the paper core into the paper
shaft and set the paper shaft to the U-shaped
gutter of paper holder.
3. Insert the paper end into paper inlet after
slipping through underneath of tension bar.
Automatic loading starts. (Automatic
loading does not start when MSW4-2 is OFF)
CAUTION
Be sure to use designated paper
If you use paper other than designated, there may be the case of printing quality and
life, etc, are not guaranteed.
Set paper straight without any slackness.
2. In case if the end of paper for replacement is
not aligned, cut straight cleanly with
scissors, etc.
Tension Bar
— 35 —