Main board cover
The main board can be exposed by unscrewing one screw that fixes the main
board cover and removing it by sliding it.
Auto cutter
Automatically cuts the paper when printing is finished.
Platen open lever
Used in an instance of cutter error or paper jam.
Tension bar
Absorbs the shock at the rotation of paper roll.
Printing head
Prints characters and graphic data on paper (paper rolls).
Interface connector (3 types)
Serial, Parallel, USB cable are connected to the interface connector. The serial
interface board is equipped with a DIP switch.
Power connector (Input voltage : DC24V±10%)
Refer to 4.2 How to Release Cutter Lock (Cutter Error)
— 16 —