Citizen PMU2300III User Manual page 21

2.2.2 Memory switch setting (Bezel function)
The bezel function can be set by MSW12.
1. MSW12-1: Bezel Function
Function : Validity / invalidity of bezel function is selected.
OFF operation at (invalid) :The bezel function is disabled
ON operation at (valid) : The bezel function is enabled.
2. MSW12-2: LED Control
Function : Validity / invalidity of bezel LED control (during standby / during printing /
during discharge) is selected.
OFF operation at (invalid): The bezel LED control is disabled.
ON operation at (valid) : The bezel LED control is enabled.
- The bezel LED display status, bezel lighting time during standby, and
bezel blinking time can be set by setting of customized value GS ( E
Command.
Initial value of bezel LED display
Initial value of bezel lighting time during standby
Initial value of bezel blinking ON/OFF time
- The bezel LED display can be changed by controlling bezel LED
command GS R 2 regardless of setting of MSW12-2.
3. MSW12-5: Show Error by LED
Function : Validity / invalidity of LED abnormal display is selected.
When an error is generated, the bezel LED is displayed by synchronizing it
with the error LED
OFF operation at (invalid): LED abnormal display is disabled.
ON operation at (valid):
4. MSW12-6: No print with paper
Function : When the bezel paper detection sensor detects the paper, validity /
invalidity of next printing / discharge operation is selected.
This function becomes effective only when the bezel for the main unit is
attached.
OFF operation at (invalid): Even if the bezel paper detection sensor
ON operation at (valid):
Setting of MSW12-2 to MSW12-6 is disabled.
Setting of MSW12-2 to MSW12-6 is enabled.
During standby : OFF
During printing : lights up
During discharge : blinks
0: continuously lights up
5: 500ms
LED abnormal display is enabled.
detects the paper, the next printing /
discharge operation is carried out.
If the bezel paper detection sensor detects the
paper, the next printing / discharge operation
is carried out after the sensor does not detect
the paper.
— 20 —