Programming Table Tax In The United States - Royal Alpha 710ML User Manual

3 If you are prompted for a Manager Passcode, type the passcode number
4 Press the Arrow Down key to select Tax Setup. Press the Amount Tend
5 Press the Arrow Down key to select the tax you want to change. Press the
6 Select Straight. Press the Amount Tend Total <Enter> key.
7 Using the round Number keys area, enter the tax you want to add. For
8 When you are done, press the Amount Tend Total <Enter> key.
9 Repeat for each tax you want to set.

Programming Table Tax in the United States

If your area uses a tax code table, you must calculate your tax codes
before you continue with this section. For instructions, see Calculating
Your Tax on page 73. When you are done calculating your tax codes,
return to this section.
Before you start, you must know where the first irregular breakpoint and
the first regular breakpoint are.
Note
If you make an error when you are entering the price ranges, press receipt
on/off <esc> and start over.
To program table tax rates for the United States
Programming Tax Set Up
1 Press the Main menu (on) key.
2 Press the Arrow Down key to select Programming. Press the Amount
3 If you are prompted for a Manager Passcode, type the passcode number
4 Press the Arrow Down key to select Tax Setup. Press the Amount Tend
5 Press the Arrow Down key to select the tax you want to change. Press the
Alpha 710ML User's Guide
and then press the Check key. If you did not program a Manager
Passcode, go to the next step.
Total <Enter> key.
Amount Tend Total <Enter> key.
example, 7750 is 7.75% tax.
Tend Total <Enter> key.
and then press the Check key. If you did not program a Manager
Passcode, go to the next step.
Total <Enter> key.
Amount Tend Total <Enter> key.
Programming Table Tax in the United States
72