Table of Contents
Advertisement
Programming Straight Add-on Tax in the United States
Programming Table Tax in the United States
55
4 Press the Arrow Down key to select System Configuration. Press the enter
key.
5 Press the Arrow Down key to select Tax System. Press the enter key.
6 Select the tax system you want to use. Press the enter key.
7 Now you need to specify the values for the tax rate(s):
• Straight tax values for Tax 1 and, optionally, Tax 2 through 4. See the next
section.
• Table tax values. See Programming Table Tax in the United States on
page54.
• VAT tax rates. See Using VAT Tax Rates on page58.
After you select the tax system to use, you must specify values. This section
explains how to specify straight add-on tax rates for the United States. Straight
add-on tax is the most common in the United States. You must specify at least 1 tax
rate and, optionally, you can specify up to 3 others.
To program straight Add-on tax rates for the United States
PRG TAX SETTING
1 Switch the control lock to PRG.
3 If you are prompted for a Manager Password, type the password number and then
press the enter key. If you did not program a Manager Password, go to the next
step.
4 Press the Arrow Down key to select TAXSETTING. Press the enter key.
5 Press the Arrow Down key to select the tax you want to change. Press the
enter key.
6 Press the Arrow Down key to select the type. Press the enter key.
7 Select the Straight. Press the enter key.
8 Using the round Number keys area, enter the tax you want to add. For example,
7750 is 7.75% tax.
9 When you are done, press the enter key.
10 Repeat for each tax you want to set.
If your area uses a tax code table, you must calculate your tax codes before you
continue with this section. For instructions, see Calculating Your Tax on page
55.When you are done calculating your tax codes, return to this section.
Before you start, you must know where the first irregular breakpoint and the first
regular breakpoint are.
Alpha5000ML owner's manual
Advertisement
Table of Contents
