Programming Straight Add-On Tax In The United States - Royal Alpha 710ML User Manual

Chapter 7 Programming Complex Tax Rates
To select a tax system
Programming More Options Config Tax System
1 Press the Main menu (on) key.
2 Press the Arrow Down key to select Programming. Press the Amount
3 If you are prompted for a Manager Passcode, type the passcode number
4 Press the Arrow Down key to select More Options. Press the Amount
5 Press the Arrow Down key to select Config. Press the Amount Tend
6 Press the Arrow Down key to select Tax System. Press the Amount Tend
7 Select the tax system you want to use. Press the Amount Tend Total
8 Now you need to specify the values for the tax rate(s):

Programming Straight Add-on Tax in the United States

After you select the tax system to use, you must specify values. This
section explains how to specify straight add-on tax rates for the United
States. Straight add-on tax is the most common in the United States. You
must specify at least 1 tax rate and, optionally, you can specify up to 3
others.
To program straight Add-on tax rates for the United States
Programming Tax Set Up
1 Press the Main menu (on) key.
2 Press the Arrow Down key to select Programming. Press the Amount
71
Tend Total <Enter> key.
and then press the Check key. If you did not program a Manager
Passcode, go to the next step.
Tend Total <Enter> key.
Total <Enter> key.
Total <Enter> key.
<Enter> key.
• Straight tax values for Tax 1 and, optionally, Tax 2 through 4. See the
next section.
• Table tax values. See Programming Table Tax in the United States on
page 72.
• Canadian tax rates. Using Canadian Tax Rates on page 76.
• VAT tax rates. See Using VAT Tax Rates on page 78.
Tend Total <Enter> key.
Alpha 710ML User's Guide