Using Training Mode; Setting The Training Passcode - Royal Alpha 710ML User Manual

Chapter 6 Ringing up Sales and Using Training Mode

Using Training Mode

We provide examples to help learn how to use this cash register. For
information about the examples, see Examples on page 98. Using the
examples can help you learn to use the cash register and the available
features.
You can enter the Training mode at any time in the Sales Registration
mode because it does not record activity in the machine totals. However,
you cannot enter Training mode in the middle of a transaction. Complete
any transactions, running reports, or programming before you enter
Training mode.
When you are using the cash register in Training mode, you cannot use
any of the operations in the PRG, X, or Z modes. The transaction
numbers and amounts do not count in the Register mode until you exit
Training mode.
When the cash register is in Training mode, the TR symbol appears in the
lower left of the clerk display and asterisks **** print instead of
transaction numbers. When you stop Training mode, the transaction
numbers continue from the last number printed before you entered
Training mode.

Setting the Training Passcode

You can set the cash register to include a training mode. This training
mode requires a 6 digit passcode.
To set the training mode passcode
Programming More Options Training Passcode
1 Press the Main menu (on) key.
2 Press the Arrow Down key to select Programming. Press the Amount
3 If you are prompted for a Manager Passcode, type the passcode number
4 Press the Arrow Down key to select More Options. Press the Amount
5 Press the Arrow Down key to select Training Passcode. Press the
6 Using the Round number keys, enter a 6 digit passcode. The passcode
7 When you are done, press the Amount Tend Total <Enter> key.
67
Tend Total <Enter> key.
and then press the Check key. If you did not program a Manager
Passcode, go to the next step.
Tend Total <Enter> key.
Amount Tend Total <Enter> key.
cannot be zeros.
Alpha 710ML User's Guide