Multiple Receipts; Receipt - Real Time Or End Of Sale; Tax; Sub-Total - Royal Alpha 710ML User Manual

you can program the first two lines and then make the remaining 3-lines
blank. Then you can either set this option to print those blank lines for
extra spacing or to skip those 3 blank lines to save on paper.

9. Multiple Receipts

Specifies if multiple receipts are allowed. You may not want to allow
issuing a second receipt for security reasons. Issuing a second receipt can
be useful for rebates, or to reprint the receipt in case the printer runs out
of paper or jams in the middle of a sale. This option does not affect the
ability to reprint a single copy of the receipt if the receipt printer was
turned off during a sales transaction or operating in receipt-on-demand
mode.

10. Receipt - Real time or End of Sale

Specifies if you want the customer receipt to print:
• per-line as each item is rung up in the sale
• print all at one time at the end of the sale
If you select "at end of the sale", then the printer does not print anything
when the sale is first started or during any entry of the sale. The printer
only prints the entire, detailed receipt after the Amount Tend Total
<Enter> key is pressed. No details on the receipt are lost. All the
information is still there, just saved in memory to be printed at the end of
the sale.

11. Tax

Specifies to print the Tax information before the Total amount on the
receipt or after the Total amount.

12. Sub-Total

Specifies to automatically print the Sub-Total on all receipts. The Sub-total
amount still prints if you press the Sub-total reprint key, regardless of this
option setting.
13. Receipt - Name Only vs. PLU & Name
Specifies if just the PLU name/description is printed on the receipt on one
line; or both, the PLU name/description and the PLU number (or the
UPC bar code number, if it was a bar code) are printed on the receipt over
2 lines.
Alpha 710ML User's Guide
Print Options
50