Programming Notes; 16-1) Date Programming; 16-2) Tax Rate Programming - Royal 140DX Instruction Manual

16) PROGRAMMING NOTES

If a mistake is made during programming, return to the beginning of that programming section, start
again and complete all the required steps.
─────────────────────────────────────────────
ALL PROGRAMMING IS PERFORMED IN THE PROGRAM MODE
─────────────────────────────────────────────
Explanation of flow charts:
This manual uses a flow chart system to illustrate programming procedures. Following are
explanations for the symbols used.
( ) : Parentheses indicate that an entry from the numeric keypad is necessary.
[ ] : Square Brackets indicate that depressing one of the function keys is necessary.

16-1) DATE PROGRAMMING

Enter the date in the sequence of month, day, and year and depress the #/ST/NS key.
( month ) ( day ) ( year ) - [ #/ST/NS ]
Example :

16-2) TAX RATE PROGRAMMING

TO SET THE STRAIGHT TAX RATE:
( 1-4 ) - [ Tax shift ] ...TAX NUMBER
( XX ) - ( 4 ) - [ Tax shift ] ... MAXIMUM NON TAXABLE PRICE AND STRAIGHT TAX STATUS (4).
( 0 - 99999 ) - [ Tax shift ] ...INDEX THE DESIRED TAX RATE (0 - 99.999%)
or
( 1-4 ) - [ Tax shift ] ...TAX NUMBER.
( 0 - 99999 ) - [ Amt Tend/TOTAL ] ...TAX RATE ( 0 - 99.999% )
Note: Even when in the programming sequence, you can exit the programming by pressing the
[Amt Tend/TOTAL] key.
( 112017 ) - [ #/ST/NS ]
11･20･17
15