What To Do If; Installation - Zanussi ZCV663 User Manual

Hide thumbs Also See for ZCV663:
Table of Contents

Advertisement

What to do if...

Warning! Refer to "Safety information" chapter.
Problem
The hob does not operate
The oven does not heat up
The oven does not heat up
The oven does not heat up
The oven does not heat up
The oven lamp does not operate
Steam and condensation settle on the
food and in the oven cavity
The display shows "12.00"
The residual heat indicator does not
come on
If you cannot find a solution to the problem yourself, con-
tact your dealer or the service centre.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

Installation

Warning! Refer to "Safety information" chapter.
Technical Data
Dimensions
Height
Width
Depth
Top oven capacity
18
Possible cause
The heat setting is not set
The oven is not switched on
The clock is not set
The necessary settings are not set
The fuse in the fuse box is released
The oven lamp is defective
You left the dish in the oven for too
long
A power cut
The cooking zone is not hot because
it operated only for a short time.
The necessary data for the service centre is on the rating
plate. The rating plate is on the front frame of the oven
cavity.
Main oven capacity
Location of the appliance
900 mm
You can install your freestanding appliance with cabinets
on one or two sides and in the corner.
600 mm
600 mm
37 l
Remedy
Set the heat setting
Switch on the oven
Set the clock
Control the settings
Control the fuse. If the fuse is re-
leased more than one time, refer to a
qualified electrician.
Replace the oven lamp
Do not leave the dishes in the oven
for longer than 15-20 minutes after
the cooking process ends
Reset the clock
If the cooking zone must be hot,
speak to the Service Centre.
.........................................
.........................................
.........................................
Dimensions
69 l

Advertisement

Table of Contents
loading

Table of Contents