What To Do If - Zanussi ZCV662 User Manual

To replace the glass panels obey the procedure in
opposite sequence. Before you lower the trim at-
tach the A trim part to the door. Refer to picture.
Oven lamp
Warning! There is a danger of electrical shock!
Before you change the oven lamp:
• Switch off the oven.
• Remove the fuses in the fuse box or switch off the
circuit breaker.

What to do if...

Warning! Refer to "Safety information" chapter.
Problem
The hob does not operate
The oven does not heat up
The oven does not heat up
The oven does not heat up
The oven does not heat up
The oven lamp does not operate
Steam and condensation settle on
the food and in the oven cavity
The display shows "12.00" and
"LED"
The residual heat indicator does
not come on
If you can not find a solution to the problem, refer to
your dealer or the Service Centre.
These data are necessary to help you quickly and
correctly. These data are available on the rating plate
(refer to "Product description")
• Model description ............
• Product number (PNC) ............
• Serial number (S.N.) ............
16
Replacing the oven light bulb/cleaning the glass cover
1. Turn the glass cover anti-clockwise to remove it.
2. Clean the glass cover.
3. Replace the oven light bulb with applicable 300°C
4. Install the glass cover.
Possible cause
The heat setting is not set
The oven is not switched on
The clock is not set
The necessary settings are not set
The fuse in the fuse box is released Control the fuse. If the fuse is released
The oven lamp is defective
You left the dish in the oven for too
long
A power cut
The cooking zone is not hot be-
cause it operated only for a short
time.
Important! If you do not operate the appliance correctly,
the visit from the Service Force Centre or dealer will not
be free of charge, even during the warranty period.
the baking or roasting procedure, steam can show on
the glass.
Put a cloth on the bottom of the oven for protec-
tion of the oven light and glass cover.
heat-resistant oven light bulb.
Set the heat setting
Switch on the oven
Set the clock
Control the settings
more than one time, refer to a quali-
fied electrician.
Replace the oven lamp
Do not leave the dishes in the oven for
longer than 15-20 minutes after the
cooking process ends
Reset the clock
If the cooking zone must be hot, speak
to the Service Centre.
Warning! Let a qualified electrician or competent
person do repairs to the appliance.
Hints for appliances with metal fronts:
If you open the door during or immediately after
Remedy