Download Print this page

Zanussi ZCV663 User Manual page 16

Hide thumbs

Advertisement

• Clean stubborn dirt with a special oven cleaner.
• Clean all oven accessories (with a soft cloth with warm
water and cleaning agent) after each use and let them
dry.
• If you have nonstick accessories, do not clean them
using an aggressive agents, sharp edged objects or
dishwasher. It can destroy nonstick coating!
Stainless steel or aluminium appliances:
Clean the oven door with a wet sponge only. Dry it
with a soft cloth.
Do not use steel wool, acids or abrasive materials as they
can damage the oven surface. Clean the oven control pan-
el with the same precautions
Catalytic walls (selected models only)
The walls with a catalytic coating are self-cleaning. They
absorb fat which collects on walls while the oven oper-
ates.
To support this self-cleaning process heat the oven
without any food regularly:
• Turn the oven light on.
• Remove accessories from the oven.
• Set the Conventional Cooking function.
• Set the oven temperature to 250 °C and let oven oper-
ate for 1 hour.
• Clean the oven cavity with a soft and damp sponge.
Warning! Do not attempt to clean catalytic surface
with oven sprays, abrasive cleaners, soap or other
cleaning agents. This will damage the catalytic surface.
Discolouration of the catalytic surface has no effect
on catalytic properties.
Oven Ceiling
You can fold down the heating element on the oven ceil-
ing to clean the oven ceiling easily.
Folding down the heating element
1.
Remove the shelf support rails.
2.
Hold the heating element with the two hands at the
front
3.
Pull it forwards against the spring pressure and out
along the support on both sides.
4.
The heating element folds down.
The oven ceiling is ready to clean.
16
Installing the heating element
1.
Install the heating element in opposite sequence.
Important! Install the heating element correctly on the two
sides above the support on the inner wall of the oven.
2.
Insert shelf support rails.
Cleaning the top oven glass panels
The door glass on your product can be different in
type and shape from what you see in diagrams. The
number of glasses can be different.
Removing the glass:
1. Open the door.
2. Push the door trim at both sides to release the clips.
Refer to the picture.
3. Remove the glass panels.

Advertisement

loading

  Also See for Zanussi ZCV663