Table of Contents
Advertisement
1.
The P2602RL-D3A includes a DSL cable and a RJ-11 cable. Connect the DSL cable to the
DSL port and connect RJ-11 to Lifeline port.
2.
You need to obtain a regular PSTN Y connector from regular phone shop.
3.
Connect the RJ-11 to one of the output jack on the Y connector
4.
Connect the DSL cable to the other output jacket on the Y connector
5.
Connect the Y connector input port with a phone cable to the wall Jack or line from ISP.
VoIP Application Notes
Setup SIP Account
VoIP is the sending of voice signals over the Internet Protocol. This allows you to make phone calls and send
faxes over the Internet at a fraction of the cost of using the traditional circuit-switched telephone network.
The Session Initiation Protocol (SIP) is an application-layer control (signaling) protocol that handles the setting
up, altering and tearing down of voice and multimedia sessions over the Internet. SIP signaling is separate from
the media for which it handles sessions. The media that is exchanged during the session can use a different path
All contents copyright (c) 2007 ZyXEL Communications Corporation.
Prestige 2602RL-D3A Support Notes
Figure 2 Splitterless type
94
Advertisement
Table of Contents
