ZyXEL Communications Prestige 2602RL-D3A Support Notes page 55

Set # Comments
------ -----------------
1 NetBIOS_WAN
2 NetBIOS_LAN
3 _______________
4 _______________
5 _______________
6 _______________
Enter Filter Set Number to Configure= 1
Edit Comments=
Press ENTER to Confirm or ESC to Cancel:
Configure the first filter set 'NetBIOS_WAN' by selecting the Filter Set number 1.

Rule 1-Destination port number 137 with protocol number 6 (TCP)
Filter #: 1,1
Filter Type= TCP/IP Filter Rule
Active= Yes
IP Protocol= 6
Destination: IP Addr= 0.0.0.0
TCP Estab= No
More= No
Action Matched= Drop
Press ENTER to Confirm or ESC to Cancel:
Set #
------ -----------------
Menu 21.1.1 - TCP/IP Filter Rule
IP Source Route= No
IP Mask= 0.0.0.0
Port #= 137
Port # Comp= Equal
Source: IP Addr= 0.0.0.0
IP Mask= 0.0.0.0
Port #= 0
Port # Comp= None
Log= None
Action Not Matched= Check Next Rule
All contents copyright (c) 2007 ZyXEL Communications Corporation.
Prestige 2602RL-D3A Support Notes
Comments
7 _______________
8 _______________
9 _______________
10 _______________
11 _______________
12 _______________
55