ZyXEL Communications Prestige 2602RL-D3A Support Notes page 75

Two new protocol filter interfaces in menu 3.2.1 allow you to accept or deny LAN packets from/to the IP alias
1 and IP alias 2 go through the Prestige. The filter set in menu 3.1 is used for main network configured in menu
3.2.

IP Alias Setup
1. Edit the first network in menu 3.2 by configuring the Prestige's first LAN IP address.
DHCP Setup
TCP/IP Setup:
Key Settings:
If the Prestige's DHCP server is enabled, the IP pool for the clients can be any of the
DHCP Setup
three networks.
Enter the first LAN IP address for the Prestige. This will create the first route in the
TCP/IP Setup
enif0 interface.
Menu 3.2 - TCP/IP and DHCP Setup
DHCP= Server
Client IP Pool Starting Address=
Size of Client IP Pool= 32
Primary DNS Server= 0.0.0.0
Secondary DNS Server= 0.0.0.0
Remote DHCP Server= N/A
IP Address= 192.168.1.1
IP Subnet Mask= 255.255.255.0
RIP Direction= None
Version= N/A
Multicast= None
IP Policies=
Edit IP Alias= Yes
Press ENTER to Confirm or ESC to Cancel:
All contents copyright (c) 2007 ZyXEL Communications Corporation.
Prestige 2602RL-D3A Support Notes
192.168.1.33
75