ZyXEL Communications Prestige 2602RL-D3A Support Notes page 98

Table of Contents

To configure the phone port setting, please follow the below step.

Step 1. Open the web browser from your workstation to connect to the Prestige by entering the Management IP

address of the Prestige. The default management IP of Prestige is 192.168.1.1.

Step 2. Enter the administrator password appear on the page of login and click on login. The default is '1234'

Step 3. On the left column click on VoIP -> Phone -> Analog Phone -> Advanced Setup to bring you to voice

function menu.

Step 4. Change the phone port parameter as you desired and click Apply when you are finish to save and let the

setting to take effect.

Each field's detail description is listed below.

Label

Description

Speaking

Use this field to set the loudness that the Prestige uses for the speech signal

Volume

that it sends to the peer device. -1 is the quietest and 1 is the loudest.

Listening

Use this field to set the loudness that the Prestige uses for the speech signal

Volume

that it receives from the peer device and sends to your phone. -1 is the

Prestige 2602RL-D3A Support Notes

Table of Contents