ZyXEL Communications Prestige 2602RL-D3A Support Notes page 53


Action Matched=
Enter the action you want if the masked packet matches the 'Value'. In this case, we will drop it.

Action Not Matched=
Enter the action you want if the masked packet does not match the 'Value'. In this case, we will
forward it. If you want to configure more rules please select 'Check Next Rule' to start configuring
the next new rule. However, please note that the 'Filter Type' must be also 'Generic Filter Rule' but
not others. Because the Generic and TCPIP (IPX) filter rules must be in different filter sets.
Menu 21.1.2 - Generic Filter Rule
Filter #: 1,2
Filter Type= Generic Filter Rule
Active= Yes
Offset= 6
Length= 6
Mask= ffffffffffff
Value= 0080c810234a
More= No
Action Matched= Drop
Action Not Matched= Forward
You can now apply it to the
be applied to the 'Device Filter'
filters.
Menu 3.1 - General Ethernet Setup
Input Filter Sets:
Output Filter Sets:
Log= None
'General Ethernet Setup'
but not the 'Protocol Filter'
protocol filters=
device filters= 1
protocol filters=
device filters=
All contents copyright (c) 2007 ZyXEL Communications Corporation.
Prestige 2602RL-D3A Support Notes
in Menu 3.1. Please note that the
that is used for configuring the TCPIP and IPX
'Generic Filter' can only
53