Canon VK-16 User Manual page 56

Using the Add Camera Server Dialog
Step 3: Update and setup camera thumbnail for Viewer
If you want to change the thumbnail and the preview area is blank
(and the 'Update' and 'Start Control' buttons are disabled), click the
Tip
'Connect' button (located in the Connection Settings field).
If you do not wish to manually control the camera, choose a pre-defined camera
3
position (if already configured) from the Preset Angle drop-down menu.
Presets need to be configured in advance. Please refer to the
camera server User's Manual for details on making camera presets.
Tip
Step 4: Select a hard drive for saving video
56
In the Preview area, a camera view is
1
given. Click the Update button to grab
a current frame from the camera. It will
be re-sized in the preview window and
saved for reference as a Viewing
Screen camera thumbnail.
If you are not happy with the frame,
2
click the Start Control button. You can
then use your mouse to redirect the
viewing angle and zoom in or out.
Move the mouse cursor around the image. Arrows
will appear and you can click and drag the cursor in
that direction. The preview will change accordingly.
When you move the mouse cursor to the center of
the image, a zoom in or zoom out control will appear.
For a VB-C50FSi and VB-C50Fi, only zoom is available.
Hold down the mouse on '
Hold down the mouse on '
In the Drive menu, select a hard disk drive
on the Storage Server.
When you have finished configuration, click
the OK button to close the dialog and return
to the Camera Summary screen.
+
' to zoom in.
-
' to zoom out.