Canon VK-16 User Manual page 77

Step 2: Enable recording and set an event priority
You cannot modify the sensor name (identified as the 'External
Device Input Name' in the VB Camera Server configuration), which
Note
is obtained from the Camera Server and therefore outside the
scope of VK-64 configuration.
Step 3: Select a camera angle for the sensor
Click the Backlight drop-down menu and select 'On' to
compensate for camera views with strong backlighting*. The
Tip
setting will be used when the sensor is triggered. This is useful, for
example, if a camera angle would change from an indoor view to an
outdoor view when the sensor is triggered.
*If you are using a VB-C50i/VB-C50iR, VB-C50FSi and VB-C50Fi, the
backlight menu options are 'High', 'Medium', 'Low' and 'Off'.
Configure Motion and Sensor Settings
Tick Record on this sensor to
1
enable recording when a sensor is
triggered.
Select the event's priority from a
2
drop-down list, from 1. Highest to
5. Lowest.
In the Camera Angle field, select a
Preset camera position from the
drop-down menu of available camera
angles. When the sensor is triggered,
the camera will be changed to this
position.
If you select Not Specified, the camera
will not be moved.
The camera angle can also be changed
by moving your mouse pointer in the
Preview area to display controls and
clicking to pan, tilt and zoom (
After the camera has been controlled,
the preset will be set to 'Custom'.
6
P. 56).
77