Recording Schedule - Edit Sensor Events Settings - Canon VK-16 User Manual

Configure Motion and Sensor Settings

Recording Schedule - Edit Sensor Events Settings

You can specify recording settings based on the occurrence of a sensor event. A number
of tabs in the Sensor Event Settings dialog are shown to reflect the number of sensors on
each camera. You can modify the recording settings for each sensor.
Step 1: Next to 'On sensor event', click the Settings... button
Click a tab to modify that
sensor's settings. The
Sensor Name is indicated
below.
Night Mode is available for
VB-C50i/VB-C50iR, VB-C50FSi
and VB-C50Fi camera servers
or VC-C50i/VC-C50iR cameras
connected to camera server
VB150, allowing you to see
video in dark conditions. You
can choose to have it Enabled,
Disabled or Not specified.
External Outputs such as
light switches can be set to
On or Not specified.
Setting Night Mode to 'Enabled' will activate the IR cut filter on
camera servers that support it. It will not turn on the built-in IR light.
Note
76
The Sensor Event Settings dialog
opens.