Notation Settings; Selecting The Part For Which Notation Will Be Shown (Part); Specifying The Timing With Which Notation Display Is To Begin (Start Position); Selecting The Part Displayed In The Right-Hand Notation (Upper) - Roland VIMA RK-300 Owner's Manual

Notation Settings

1.
Access the main screen.
* If the main screen is not shown, press the [EXIT] button until
the main screen appears.
2.
Touch < Menu >.
The Menu screen appears.
fig.d-SetMenu3-2.eps
* There are three menu screens. Touch
screens.
3.
Touch < Notation >.
The following screen appears.
fig.d-Notation.eps
4.
To change the setting, touch
you want to specify.
If you touch < Reset >, all settings (parameters) shown in the
current screen will return to their factory-set values.
5.
When you're finished making settings, press the
[EXIT] button.
Selecting the Part for which Notation
will be Shown (Part)
The RK-300 can display notation divided into the right-hand
and left-hand parts. You can specify how the notation of the
right-hand and left-hand parts will be displayed.
Specifying the Timing with which
Notation Display is to Begin
(Start Position)
This specifies the timing at which the notation will start to be
displayed.
to switch
Selecting the Part Displayed in the
Right-hand Notation (Upper)
Selecting the Part Displayed in the
Left-hand Notation (Lower)
for the item
Displaying Note Names in the Score
(Pitches)
Setting Explanation
The notation for only the right-hand part
Upper
will be displayed.
The notation for both the right-hand and
Both
left-hand parts will be displayed.
Setting Explanation
The notation will be shown from the first
First Note
note.
The notation will be shown from the intro
Song Top
of the song.
Setting
1–16
Setting
1–16
Setting Explanation
Off Note names will not be displayed.
C, D, E Note names will be displayed as "C, D, E".
DoReMi
Note names will be displayed as "fixed do."
(Fixed)
DoReMi Note names will be displayed as "movable
(Movable) do."
Settings
177