If Using The Ks-G8 Stand - Roland VIMA RK-300 Owner's Manual

Installing the RK-300 on the KSC-48
4.
Set the RK-300 on the KSC-48, then firmly attach
the four knob bolts.
* When handling the RK-300, firmly grasp it. Be careful, so you
do not get your fingers pinched.

If Using the KS-G8 Stand

Please don't
get your fingers
pinched
Place the RK-300 so that the rubber feet closest to its rear panel
are directly above the arms at locations (A) and also located at
both sides of the rubber feet of the arms.
Make sure that the screws located on the bottom of the RK-300
at locations (B) are not resting on the arm's rubber foot.
Front (keyboard) side
Top View
(A)
(B)
Rear panel side
(B)
Getting Ready
(A)
27