Service-Related Features; Service Mode Operations - Canon BJC-6200 Service Manual

Part 2: Troubleshooting

7. SERVICE-RELATED FEATURES

The printer has a Service Mode for accessing service settings and executing test printouts. The operations
can be selected via the operation panel buttons.

7.1 Service Mode Operations

1) With the printer turned off, hold down the RESUME button and press and hold the POWER button
(the green indicator lights).
2) While holding down POWER button, release the RESUME button and then press the RESUME button
twice in succession. Then release both the RESUME button and POWER button.
(Each time the RESUME button is pressed, the indicator's color toggles between orange and green.)
3) During the printer initialization, the green indicator blinks. When the green indicator stops blinking and
lights on, press the RESUME button the stipulated number of times to execute the desired operation
listed below.
(Each time the RESUME button is pressed, the indicator's color toggles between orange and green.)
Press
0 times
1 time
2 times
3 times
4 times
5 times
6 times
7 times or more
4) After making the selection, press the POWER button. The green indicator lights and the function will
be executed.
(After the function is executed, the printer will power off.)
* After selecting model setting, press the RESUME button the number of times indicated below to set
the product type.
(During the initialization, the green indicator blinks. Each time the RESUME button is pressed, the
indicator's color toggles between orange and green.)
Press
0 times
1 time
2 times or more
After selecting the model, press the POWER button to finalize the setting.
(After the printer executes the function, it will turn off.)
Indicator Function
Lights in green Service/factory test printout
Lights in orange EEPROM information printout
Lights in green EEPROM initialization (All the information will be reset to the
Lights in orange Clears the waste-ink counter
Lights in green Model setting*: The setting procedure is described below.
Lights in orange Ink availability check and print
Lights in green Auto print head position adjustment
Lights in orange Power off/Carriage lock
Indicator Function
Lights in green BJ F620 (Japan)
Lights in orange BJC-6200 (All other countries)
--- Saved as a reserved area where the setting will not be rewritten.
Before entering the service mode, install the BJ cartridges. The service mode cannot be
executed without the cartridges installed.
After setting the model, confirm the setting with the service/factory test printout.
default, except for the model setting.)
2-28
BJC-6200