Adjustments And Settings After Disassembly And Reassembly; Adjustments - Canon BJC-6200 Service Manual

BJC-6200

3.4 Adjustments and Settings After Disassembly and Reassembly

3.4.1 Adjustments

(1) User Level
Timing
After BJ cartridge
installation/removal
(2) Serviceman Level
Timing
After idler pulley
installation/removal
After control board
replacement or waste-ink
absorber replacement
After
replacement/disassembly
of carriage unit parts
After loosening the head
gap set screws
Parts to be greased
Adjustment
BJ cartridge printing position
adjustment
Adjustment
Belt tension
EEPROM setting
BJ cartridge printing position
adjustment
Head gap
See page 2-18
When applying grease, be careful not to get any grease on the wiper and cap.
Time Required
2 min.
Time Required
1 min.
1 min.
2 min.
5 min.
---
2-17
Part 2: Troubleshooting
Tools Required
2 sheets of B5 or larger
paper
Tools Required
Tension spring
(QY9-0043)
None
2 sheets of B5 or larger
paper
Gap gauge
(QY9-0038)
Grease PG-641
(CK-0562),
Floil 946P, brush