Transporting The Printer; Preparation For Transport - Canon BJC-6200 Service Manual

Part 2: Troubleshooting

5. TRANSPORTING THE PRINTER

Before moving or transporting the printer, put one BJ cartridge (with the ink tank installed) in the cartridge
container. This is to prevent the ink from leaking and the BJ cartridge's ink nozzles from drying up.
Before returning the repaired printer back to the customer, move the carriage to the cartridge replacement
position and tape it at that position.

5.1 Preparation for Transport

When transporting the printer, follow the procedure below.
1) With the printer turned on, open the front cover and move the carriage to the cartridge replacement
position.
2) Remove one cartridge from the carriage and put it in the cartridge container.
3) Turn off the printer by pressing the POWER button.
4) Then, from Service Mode, conduct the power off/carriage lock procedure.
For details, refer to 7.1 Service Mode Operations on page 2-28 .
5) Disconnect the interface cable (s).
6) Disconnect the AC plug from the power outlet.
7) Close the front cover.
8) Pack the printer in its original packaging. If you do not have the original packaging, use sufficient
cushioning material when packing the printer.
2-24
BJC-6200