Service-Related Features; Service Mode Operations - Canon S600 Service Manual

S600

7. SERVICE-RELATED FEATURES

The printer has a service mode for accessing service settings and executing a test
printout. You can use the operation panel to switch to the service mode.

7.1 Service Mode Operations

1) With the printer turned off, hold down the RESUME button and press the POWER
button (the green indicator lights and the desired service function can be selected).
2) While holding down POWER button, let go of the RESUME button and then press the
RESUME button twice in succession. Then let go of the RESUME button and POWER
button.
(Each time you press the RESUME button, the indicator's color toggles between orange
and green.)
3) During printer initialization, the green indicator blinks. When the green indicator
stops blinking and remains on, press the RESUME button the stipulated number of
times to execute the desired service function listed below.
(Each time you press the RESUME button, the indicator's color toggles between orange
and green.)
Press
0 times
1 time
2 times
3 times
4 times
5 times
6 times or
more
4) After selecting the service function, press the POWER button. The green indicator
lights and the service function will be executed.
(After the respective function is executed, the printer returns to the service function
selection mode.)
Indicator Function
Lights green Power off (Even if there is no BJ cartridge mounted, the
carriage will return to the home position and lock.)
Lights orange Service/factory test printout(Including ink sensor check)
Lights green EEPROM information printout
Lights orange EEPROM initialization (All the information will be reset
Lights green Clears the waste-ink counter
Lights orange Market area (printer) setting
After the power is turned on and a service function is
executed, press the RESUME button the stipulated
number of times to set the market area setting.
(For BJ S600: Press twice. For S600: Press once.)
Lights green Press the POWER button to return to the service function
selection mode.
To cancel printing after it begins, press the POWER button.
The Power lamp will blink for a while and then stay lit. You can then select
another service function.
to the default, but the printer
settings will not be affected.)
2-29
Part 2: Troubleshooting