Technical Specifications; Analog; Digital - RME Audio Multiface User Manual

33. Technical Specifications

33.1 Analog

AD
Resolution: 24 bit
Signal to Noise ratio: 101 dB RMS unweighted, 106 dBA
THD: < -100 dB, < 0.001 %
THD+N: < -92 dB, < 0.002 %
Channel separation: > 100 dB
Frequency response AD @ 44.1 kHz, -0.5 dB: 5 Hz - 20.7 kHz
Frequency response AD @ 96 kHz, -0.5 dB: 5 Hz - 32 kHz
Input: 6.3 mm TRS jack, electronically balanced
Input impedance: > 5 kOhm
Input sensitivity switchable to Lo Gain, +4 dBu, -10 dBV
Input level for 0 dBFS @ Lo Gain: +19 dBu
Input level for 0 dBFS @ +4 dBu: +13 dBu
Input level for 0 dBFS @ -10 dBV: +2 dBV
DA
Resolution: 24 bit
Signal to Noise ratio: 108 dB RMS unweighted, 111 dBA (unmuted)
THD: < - 98 dB, < 0.0013 %
THD+N: < -91 dB, < 0.002 %
Crosstalk: > 100 dB
Maximum output level: +19 dBu
Frequency response DA @ 44.1 kHz, -0.5 dB: 5 Hz – 20.9 kHz
Frequency response DA @ 96 kHz, -0.5 dB: 5 Hz - 35 kHz
Output: 6.3 mm TRS jack, servo-balanced
Output impedance: 47 Ohm
Output level by jumper: Hi Gain, +4 dBu, -10 dBV
Output level at 0 dBFS @ Hi Gain: +19 dBu
Output level at 0 dBFS @ +4 dBu: +13 dBu
Output level at 0 dBFS @ -10 dBV: +2 dBV
Stereo Monitor Output
Maximum output level at 0 dBFS: +8 dBu
Dynamic range: 108 dB (RMS unweighted, unmuted), 112 dBA
THD+N: -100 dB / 0.001 %
Channel separation: > 110 dB
Frequency response DA, -0.1 dB: 20 Hz - 20.8 kHz (sf 44,1 kHz)
Frequency response DA, -0.5 dB: 10 Hz - 44 kHz (sf 96 kHz)
Output impedance: 75 Ohm

33.2 Digital

Low Jitter Design: < 3 ns external clock, < 1 ns internal clock
Internal sample rates: 32 / 44.1 / 48 / 88.2 / 96 kHz
Supported sample rates through word clock: 28 kHz - 103 kHz
Internal resolution: 24 bit
Input PLL ensures zero dropout, even at more than 40 ns jitter
Bitclock PLL for trouble-free varispeed ADAT operation
Ground-free digital inputs and outputs
User's Guide HDSP System Multiface © RME
71