Table of Contents
Advertisement
4. Technical Specifications
Power supply: Internal, 100-240 V AC, 30 Watts
Dimensions 483 x 44 x 205 mm
Weight: 2 kg
4.1 Analog Specs
AD
Resolution AD: 24 bit
Signal to Noise ratio: 112 dB RMS unweighted, 116 dBA
THD: < -110 dB, < 0.00032 %
THD+N: < -102 dB, < 0.0008 %
Crosstalk: > 130 dB
Maximum input level AD: +19 dBu
Frequency response AD, -0.1 dB: 5 Hz – 21.5 kHz
Input Line: 1/4" TRS and 25 pin D-sub, servo balanced
Input impedance Line: 10 kOhm
Input sensitivity switchable: +4 dBu, -10 dBV, Hi Gain
Input level for 0 dBFS @ Lo Gain: +19 dBu / -1 dBV
Input level for 0 dBFS @ +4 dBu: +13 dBu
Input level for 0 dBFS @ -10 dBV: +2 dBV
DA
Resolution DA: 24 Bit
Dynamic Range: 112 dBA (unmuted)
THD: < -104 dB, < 0.00063 %
THD+N: < -102 dB, < 0.0008 %
Crosstalk: > 110 dB
Maximum output level DA: +19 dBu
Frequency response DA, -0.1 dB: 5 Hz – 21.6 kHz
Output Line: 1/4" TRS and 25 pin D-sub, servo balanced
Output impedance Line: 47 Ohm
Output level switchable: Hi Gain, +4 dBu, -10 dBV
Output level at 0 dBFS @ Hi Gain: +19 dBu
Output level at 0 dBFS @ +4 dBu: +13 dBu
Output level at 0 dBFS @ -10 dBV: +2 dBV
4.2 Digital Specs
Super Low Jitter Design: < 4 ns word clock PLL, < 1 ns ADAT PLL, < 1 ns internal
Internal sample rates: 44.1 kHz, 48 kHz
Supported sample rates through word clock in: 27 kHz - 57 kHz
Internal resolution: 24 bit
Outputs: ADAT optical (24 bit), TDIF-1 (24 bit), word clock
Inputs: ADAT optical (24 bit), TDIF-1 (24 bit), word clock
Supported sample rates through ADAT In: 33 kHz - 57 kHz
Bit Split: 24 bit to 1 channel 16 bit and 1 channel 8 bit
Copy Mode: Direct 24 bit copying from ADAT to ADAT/TDIF and vice versa
User's Guide ADI-8 PRO © RME
5
Advertisement
Table of Contents
