Technical Specifications; Digital; Digital Interface; Transfer Modes: Resolution / Bits Per Sample - RME Audio Hammerfall DIGI9636 User Manual

5. Technical Specifications

5.1 Digital

Low jitter S/PDIF: < 5 ns in PLL mode (44.1 kHz, optical in)
Ultra-low jitter ADAT: < 2 ns in PLL mode (44.1 kHz, optical in)
Input PLL ensures zero dropout, even at more than 40 ns jitter
Bitclock PLL for trouble-free varispeed operation in ADAT mode
High-sensitivity input stage (< 0.2 Vss input level)
Output voltage 0.8V (consumer mode, phono) or 2.3V (professional mode)
Sample frequencies: 32 / 44.1 / 48 / 88.2 / 96 kHz and variable (word clock) supported

5.2 Digital Interface

Phono input and output ground-free transformer coupled
Connectors: optical (TOSLINK), phono, internal (CD-ROM/Sync in, Sync out)
Clocks: ADAT Sync In
Formats: S/PDIF (Consumer and Professional), ADAT optical

5.3 Transfer Modes: Resolution / Bits per Sample

32 bit, 4 byte (stereo 8 byte)
This format is compatible with 16-bit and 20-bit. Resolutions below 24-bit are handled by the
audio application. The card works internally with 32-bit data, but audio data transfer is limited to
24-bits.
DIGI9636 User's Guide © RME
4