Table of Contents
Advertisement
4. Brief Description and Characteristics
Hammerfall design: 0% (zero!) CPU load, even using all 36 ASIO channels
All settings can be changed in real-time
Enhanced mixed mode: ADAT In, S/PDIF In, and all outputs can be used simultaneously
8 available buffer sizes/latencies: 1.5 / 3 / 6 / 12 / 23 / 46 / 93 / 186 ms
Sample Split technology for 4 channel, 96 kHz/24-bit record/playback via ADAT optical
Slave and master clock modes
Automatic and intelligent master/slave clock control
Unsurpassed Bitclock PLL (audio synchronization) in ADAT mode
Word clock input and output
ADAT Sync in (9-pin D-type) for sample-accurate transfer
Zero Latency Monitoring: Hardware bypass per track, controlled by Punch in/out
Enhanced ZLM for latency-free submixes and perfect ASIO Direct Monitoring
SyncAlign guarantees sample aligned and never swapping channels
SyncCheck tests and reports the synchronization status of input signals
1 x MIDI I/O, 16 channels high-speed MIDI
1 x Analog Line/headphone output, separate output for independent submix
DIGICheck DSP: Level meter in hardware, peak- and RMS calculation
TotalMix: 720 channel mixer with 40 bit internal resolution
5. Technical Specifications
5.1 Digital
Super Low Jitter Design: < 3 ns word clock PLL, < 2 ns ADAT PLL, < 1 ns internal
Internal sample rates: 32 / 44.1 / 48 / 88.2 / 96 kHz
Supported sample rats through word clock: 27 kHz - 103 kHz
Internal resolution: 24 Bit
Input PLL ensures zero dropout, even at more than 40 ns jitter
Bitclock PLL for trouble-free varispeed operation in ADAT mode
High-sensitivity input stage (< 0.2 Vss input level)
Output voltage 0.8V (consumer mode, phono) or 2.3V (professional mode)
Phono input and output ground-free transformer coupled
Connectors: optical (TOSLINK), phono, BNC
Clocks: ADAT Sync In, word clock I/O
Formats: SPDIF (Consumer and Professional), ADAT optical
5.2 Analog
Stereo Monitor Output
Analog output level: +8 dBu @ 0 dBFS
Dynamic range: 108 dB (RMS unweighted, unmuted), 112 dBA
THD+N: -100 dB / 0.001%
Frequency response DA, -0.1 dB: 20 Hz - 20.8 kHz (sf 44,1 kHz)
Frequency response DA, -0.5 dB: 10 Hz - 44 kHz (sf 96 kHz)
Sample rates playback: 32 / 44.1 / 48 / 64 / 88.2 / 96 kHz and variable (word clock)
Ouput impedance: 75 Ohm
Channel separation: > 110 dB
User's Guide HDSP System Multiface © RME
5
Advertisement
Table of Contents
