Technical Specifications; Analog - RME Audio Hammerfall HDSP 9632 User Manual

5. Technical Specifications

5.1 Analog

AD – Line In
Resolution AD: 24 Bit
Signal to Noise ratio (SNR): 109 dB RMS unweighted, 111 dBA @ 44.1 kHz
THD @ -3 dBFS: -101 dB, < 0.001 %
THD+N @ -3 dBFS: -99 dB, < 0.0015 %
Crosstalk: 108 dB
Frequency response AD @ 44.1 kHz, -0.5 dB: 5 Hz - 21.5 kHz
Frequency response AD @ 96 kHz, -0.5 dB: 5 Hz – 45.3 kHz
Frequency response AD @ 192 kHz, -1 dB: 5 Hz - 74 kHz
Input Line: phono unbalanced, optional XLR balanced
Input impedance: 10 kOhm
Input sensitivity: Lo Gain, +4 dBu, -10 dBV
Input level for 0 dBFS @ Lo Gain: +19 dBu
Input level for 0 dBFS @ +4 dBu: +13 dBu
Input level for 0 dBFS @ -10 dBV: +2 dBV
DA – Line Out
Resolution DA: 24 Bit
Signal to Noise ratio (SNR): 110 dB RMS unweighted, 112 dBA @ 44.1 kHz (unmuted)
THD: < - 104 dB, < 0.00063 %
THD+N: < -102 dB, < 0.0008 %
Crosstalk: > 110 dB
Maximum output level: +19 dBu
Frequency response @ 44.1 kHz, -0.5 dB: 1 Hz – 21.1 kHz
Frequency response @ 96 kHz, -0.5 dB: 1 Hz – 43.5 kHz
Frequency response @ 192 kHz, -0.5 dB: 1 Hz – 70 kHz
Output Line: phono unbalanced, optional XLR balanced
Output impedance: 50 Ohm
Output level: Hi Gain, +4 dBu, -10 dBV
Output level at 0 dBFS @ Hi Gain: +19 dBu
Output level at 0 dBFS @ +4 dBu: +13 dBu
Output level at 0 dBFS @ -10 dBV: +2 dBV
DA - Stereo Monitor Output (Phones)
Signal to Noise ratio (SNR): 110 dB RMS unweighted, 112 dBA @ 44.1 kHz (unmuted)
THD: < - 100 dB, < 0.001 %
THD+N: < -98 dB, < 0.0015 %
Crosstalk: > 100 dB
Frequency response @ 44.1 kHz, -0.5 dB: 1 Hz – 21.1 kHz
Frequency response @ 96 kHz, -0.5 dB: 1 Hz – 43.5 kHz
Frequency response @ 192 kHz, -0.5 dB: 1 Hz – 70 kHz
Output: 6.3 mm TRS jack, optional Neutrik lockable
Output impedance: 50 Ohm
Output level @ 0 dB: +13 dBu
Output level @ –6 dB: +7 dBu
Output level @ -12 dB: +1 dBu
User's Guide Hammerfall DSP 9632 © RME
5