Service Mode; Service Mode Operations - Canon BJC-8200 Photo Service Manual

Part 3: OPERATION

2. SERVICE MODE

This printer has a service mode for service-related settings or performing test printing.
The operator panel buttons are used to enter Service Mode.

2.1 Service Mode Operations

1) With the printer powered off, while pressing the RESUME button, press and hold the
POWER button. The beeper will sound once.
2) While holding down the POWER button, release the RESUME button. Press the
RESUME button twice in succession, and then release both buttons. (Each time the
RESUME button is pushed, the beeper will sound once.) The indicator will blink in
green, and then light in green.
3) Select one of the following service mode functions by pressing the RESUME button the
specified number of times. (Each time the RESUME button is pushed, the beeper will
sound once.)
Times
0
1
2
3
4
5
6
7
8
9
10 or more
Functions marked with "*": pressing the POWER button lets you select further sub-
functions (refer to indicated pages).
4) Execute the function you have selected by pressing the POWER button. The beeper
will sound once. (The printer will return to service mode selection mode after
performing the function.)
Indicator
Lights in green
Lights in orange
Lights in green
Lights in orange
Lights in green
Lights in orange
Lights in green
Lights in orange
Lights in green
Lights in orange
Blinks in orange
Functions
Power off the printer
Service test print
EEPROM information print
EEPROM reset (all data cleared except USB serial
number)
Waste ink counter setting* (see
Model setting* (see page
Print head position pattern printing
Print head position setting* (see
Roller cleaning
Plain paper feeding/ejection after roller cleaning
Return to service mode selection (return to the
state when step (2) above is completed.)
3-8
BJC-8200
page 3-11)
3-12)
page 3-12)